QSC DCS Screen Channel Speakers
The Digital Cinema Series (DCS) includes 2-way, 3-way, and 4-way screen channel loudspeakers. It’s a diverse collection, but every model embodies QSC attention to detail in design and construction. The result is the smartest loudspeaker line in cinema, starting with a host of innovations built into our screen channel lines.
Product Description
DCS Series Screen Channel Speakers
A built-in tilt to the high-frequency horns on 3- and 4-way systems provides more even convergence with the mid-range pattern, ensuring optimum seating-area coverage.
The pan-tilt mechanism for mid-high components makes quick work of assembling and aligning screen channel systems. The assembly is labeled for repeat-ability and features a notched tilt adjustment to maintain vertical alignment.
An exclusive integrated sight that works even after the screen has been installed, CineSight allows fast, accurate aiming without having to remove the driver.
The broad-range mid-frequency driver in 3- and 4-way DCS systems keeps key speech frequencies together for superb dialog intelligibility.
A built-in tilt to the high-frequency horns on 3- and 4-way systems provides more even convergence with the mid-range pattern, ensuring optimum seating-area coverage.
Model-specific DSP presets in our DCP, DXP, DCM, BASIS™ and Q-SYS™ processors optimizing our loudspeakers for great performance right out of the box.
The driver protection and equalization network in our screen channel systems improves reliability by protecting HF drivers against damaging DC or low frequency signals.
2-Way Passive System
Features
- Optimized design for smaller cinemas—up to 35 ft (11 m) in length
- Single enclosure, two-way screen channel loudspeaker
- Requires less than 12 inches (305 mm) behind screen
- Passive crossover requires only one amplifier channel
- 90° Axisymmetric horn
- 12″ (305 mm) woofer with 2.5″ (63 mm) voice coil
- 1.75″ (44 mm) voice coil HF compression driver
- Screw-type barrier-strip connectors
SPECIFICATIONS
|
SC-1120 |
Rated Coverage Angle (-6 dB) | 90° Axisymmetric |
Frequency Range 1 (-10 dB) | 48 Hz to 19 kHz |
Rated Noise Power 2 | 300 W |
Sensitivity 3 | 95.5 dB |
Maximum Continuous SPL 4 | 120 dB |
Maximum Peak SPL 4 | 126 dB |
Impedance | 8Ω |
Maximum Recommended Amplifier Power | 600 W |
Transducers | LF: 12″ (305 mm) woofer, 2.5″ voice coil HF: Compression driver with 1.75″ (44 mm) voice coil |
Enclosure | MDF, non-reflective vinyl wrap |
Dimensions (HxWxD) inches | 27.2 × 19.5 × 11.7 |
Dimensions (HxWxD) mm | 690 × 497 × 297 |
Net Weight | 51 lb (23.2 kg) |
1 Free-field, unprocessed, -10 dB from on-axis sensitivity
2 AES2-1984 noise signal for 2 hours
3 On-axis, free-field sensitivity, 2.83 V at 1 m
4 Calculated from rated noise voltage and sensitivity
Specifications are subject to change without notice.
Features
- Optimized design for smaller cinemas—up to 45 ft (14 m) in length
- Single enclosure, two-way screen channel loudspeaker
- Requires less than 12 inches (305 mm) behind screen
- Passive crossover requires only one amplifier channel
- 90° Axisymmetric horn
- 15″ (380 mm) woofer with 3″ (76 mm) voice coil
- 1.75″ (44 mm) voice coil HF compression driver
- Screw-type barrier-strip connectors
SPECIFICATIONS
|
SC-1150 |
Rated Coverage Angle (-6 dB) | 90° Axisymmetric |
Frequency Range 1 (-10 dB) | 43 Hz to 19 kHz |
Rated Noise Power 2 | 400 W |
Sensitivity 3 | 96 dB |
Maximum Continuous SPL 4 | 122 dB |
Maximum Peak SPL 4 | 128 dB |
Rated Impedance | 8Ω |
Maximum Recommended Amplifier Power | 600 W |
Transducers | LF: 15″ (380 mm) woofer, 3″ voice coil HF: Compression driver with 1.75″ (44 mm) voice coil |
Enclosure | MDF, non-reflective vinyl wrap |
Dimensions (H×W×D) inches | 27.2 × 30 × 11.7 |
Dimensions (H×W×D) mm | 690 × 762 × 297 |
Net Weight | 71 lb (32.3 kg) |
1 Free-field, unprocessed, -10 dB from on-axis sensitivity
2 AES2-1984 noise signal for 2 hours
3 On-axis, free-field sensitivity, 2.83 V at 1 m
4 Calculated from rated noise voltage and sensitivity
Specifications are subject to change without notice.
Features
- Two-way, passive screen channel system
- HF-75CX1 provides 90° horizontal by +20° to -30° vertical coverage
- LF-3115 enclosure is constructed of MDF
- Low-distortion waveguide provides highly articulate dialogue
- Shallow depth (20″) facilitates installation
SPECIFICATIONS
|
SC-312XC | |
Nominal Coverage | 90° horizontal by +15 to -35° vertical | |
Frequency Range (-6 dB) | 32 Hz to 16 kHz | |
Impedance | 4 ohms | |
Sensitivity 1 watt/1 meter, half space | 95 dB | |
Maximum Input Power1 2 hours of 6 dB crest factor pink noise, 50 Hz to 20 kHz, AES methodRecommended Amplifier Power |
150 W continuous300 W continuous maximum | |
Recommended Processing | Subsonic filter below 30 Hz, >18 dB per octave | |
LF-3115 | HF-75CX1 | |
Connectors | Barrier strip screw terminals accept up to #10 AWG stranded wire | Barrier strip screw terminals accept up to #10 AWG stranded wire |
Transducers | One 15″ (381 mm) high-efficiency, extended bass woofers featuring 3″ copper voice coils | 1.5″ (38 mm) exit, 3″ titanium diaphragm compression driver |
Enclosure | Quasi B4 alignment, ported enclosure with fully flared ports, symmetrical port design, tuned to 36 Hz, constructed of MDF and heavily braced. Features vandal-resistant woofer mounting bolts. | Tilt/Pan Bracket ± 10° vertical tilt ± 10° horizontal pan |
Dimensions (HWD) inches | 30 x 18.36 x 20.3 | 30 x 16 x 20 |
Dimensions (HWD) mm | 473.2 x 762 x 516 | 406 x 762 x 508 |
Net Weight | 83 lb (38 kg) | 40 lb (18.4 kg) |
System Weight | 123 lb (56.4 kg) | |
Baffle Cut-Out | 35.5″ x 32″ |
Specifications are subject to change without notice.
Features
- Two-way, passive screen channel system
- HF-75CX2 provides 90° horizontal by +20° to -30° vertical coverage
- LF-3215 is constructed of MDF and features two single woofer chambers
- Low-distortion waveguide provides highly articulate dialogue
- Shallow depth (20″) facilitates installation
SPECIFICATIONS
|
SC-322XC | |
Nominal Coverage | 90° horizontal by +15 to -35° vertical | |
Frequency Range (-6 dB) | 32 Hz–16 kHz | |
Impedance | 4Ω | |
Sensitivity 1 watt/1 meter, half space | 97.5 dB | |
Maximum Input Power 1 2 hours of 6 dB crest factor pink noise, 50 Hz–20 kHz, AES methodRecommended Amplifier Power |
300 W continuous600 W continuous maximum | |
Recommended Processing | Subsonic filter below 30 Hz, >18 dB per octave | |
LF-3215 | HF-75CX2 | |
Connectors | Barrier strip screw terminals accept up to #10 AWG stranded wire | Barrier strip screw terminals accept up to #10 AWG stranded wire |
Transducers | Two 15″ (381 mm) high efficiency, extended bass woofers featuring 3″ copper voice coils | 1.5″ (38 mm) exit, 3″ titanium diaphragm compression driver |
Enclosure | Quasi B4 alignment, ported enclosure with fully flared ports, symmetrical port design, tuned to 36 Hz, constructed of MDF and heavily braced. Features vandal resistant woofer mounting bolts. | Tilt/Pan Bracket ± 10° vertical tilt ± 10° horizontal pan |
Dimensions (HWD) inches | 30 × 36 × 20.3 | 30 × 16 × 20 |
Dimensions (HWD) mm | 910 x 762 x 516 | 406 x 762 x 508 |
Net Weight | 172 lb (78 kg) | 40 lb (18.4 kg) |
System Weight | 212 lb (96.4 kg) | |
Baffle Cut-Out | 53″ × 32″ |
Specifications are subject to change without notice.